toxic Mody|new rubber band bracelets

duced appear performance defects and practical function is reduced . Some customer are holding ready-made products for Soft-hardness comparison directly and then choose one of them . In nowadays the custom silicone bracelets is one of them. So how to choose the hardness for custom silicone bracelets . The choice of softness and hardness of silica gel will have different effects on the properties of different products . At present, the hardness of commonly used silica gel hand rings is between 40 degrees and 60 degrees and material with different hardness has certain difference . For example , the tensile rate of 40 degree materials will reach about 150% , and the tensile rate 60 degree materials can only reach about 80% . So in order to confirm the functionality of products , we have to test them . It is more difficult to produce high hardness silica gel hand rings . For the manufacturers of silica gel hand rings , the higher the hardness , the higher the defective rate of the products and the new rubber band braceletspulling force of the products will also be affected and will cause fracture phenomenon at any time . Therefore , we suggest that the hardness of the silica gel hand rings should not be too high .      

new rubber band bracelets ossed or debossed effect on the silicone wristband customized. The important difference in the production process from a normal plain silicone wristband is to make the embossed or debossed mould first. This kind of mould is made from copper with the logo inside. When it extruded the silicone , the logo will be one the band. Silk screen printing is applied for printed silicone bracelets. Modern screen printing technology is making screen by photoengraving method using photosensitive material ,oil paintings, prints, posters, name card, binding covers, packaging, commodity, textile printing and dyeing, glass and metal plane carrier. And also this is the printing method for the printed silicone bracelets. With the long term use of a rubber wristband, we will find it full of dirt things. So how to clean it become a question.Here a simple way for cleaning. First place the rubber wristband in warm water for 3-5 minutes. Then gently rub it a few and put it to cool dry place. Detergent is recommended if the previous method does not work.   free-rubber-braceletsdesign-rubber-bracelets

how to make rubber band bracelets without loom